This part fits between the CPAP hose and the machine on Respironics Aira, Virtuoso, Aria LX and Virtuoso LX systems. It includes the Pressure Sensor Line which is a small clear tube shooting off from the main body of the part.
This valve that helps prevent the back flow of oxygen (O2) or water from the patient circuit into CPAP/BiPAP systems when the machine is turned off. It helps protect the system from water back flow -- from the breathing tube or an external humidifier -- which can cause permanent damage to the machine and oxygen back flow which can be a fire hazard.
This Whisper Swivel is used to remove excess waste gasses from some older Respironics CPAP/BiPAP masks. It should only be used on Reusable Silicone Contour Masks, Gold Seal Masks, and some older ProfileLite Masks that did not come with a swivel.
This Oxygen Enrichment Adapter will connect oxygen tubing from any tank or concentrator to your CPAP/BiPAP machine. The capped O2 port allows you to seal off the connector when not in use to keep your CPAP system running at full capacity without the hassle of removing the entire connector.
This "Christmas Tree" adapter allows small oxygen tubing (such as standard 3/16" I.D. Tubing sold on this site) to connect easily to standard stationery oxygen flowmeters, cylinders and related products. Our Christmas Tree Adapter is made of high grade plastic to resist breakage and includes deep grooved barbs to prevent oxygen leakag. It is not needed for most portable or travel oxygen concentrators.
This Tubing Adapter is used to connect the SoClean CPAP/BiPAP Sanitizer to DreamStation & SystemOne Series CPAP/BiPAP Machines with Heated Humidifiers.
This Gray Tubing Elbow Adapter allows you to connect standard or slim breathing tubes to most CPAP/BiPAP machines at a 90 degree angle to the machine so there is less stress on the tubing connection and the pathway from the sleep therapy device to the bed is more convenient. Made by Respironics this elbow is compatible with systems from most other manufacturers as well.
This Humidifier Connector Adapter Tubing can be used to attach a humidifier bottle -- like the Bubble Humidifier Bottles found on this site -- to most continuous flow oxygen concentrators. The connector tube is approximately 15-inches long with a molded oxygen tubing connector on one end and a male thread grip on the other end. The connector tubing includes multiple inner channels to prevent occlusion and kinking.
This Humidifier Connector Adapter Elbow with Oxygen Tubing can be used to attach a humidifier bottle -- like the Bubble Humidifier Bottles found on this site -- to most continuous flow oxygen concentrators. The connector is approximately 10 Inches long with standard oxygen tubing on one end and a male thread grip elbow on the other end.
ClimateLine OXY Heated Tubing is designed exclusively for use with ResMed's AirSense 10 Series CPAP and AirCurve 10 Series BiLevel machines. It includes a supplemental oxygen port built directly into the tube so it is an ideal solution for Sleep Therapy users who also require oxygen therapy. ClimateLineAir OXY adjusts heating and humidity throughout the night to protect against rainout and deliver constant, comfortable temperature and humidity levels.
ClimateLine MAX OXY Heated Tubing is designed for use with all S9 Series CPAP/BiLevel Machines that are equipped with an H5i Heated Humidifier. It includes a supplemental oxygen port built directly into the tube so it is an ideal solution for Sleep Therapy users who also use oxygen therapy. ClimateLine MAX OXY uses built in sensors within the tube to increase temperature and humidity while preventing condensation and rainout.
This kit allows you to run any PR SystemOne 60 Series REMstar CPAP/BiPAP Machine from either a standard DC power outlet or a 12-volt battery. The kit includes two cords: the 1097568 DC Cord and the 532209 Direct Connect Cord, both from Philips Respironics.
This kit allows you to run a wide range of CPAP/BiPAP machines from either a standard DC power outlet or a 12-volt battery. The kit includes two cords: the 1001956 DC Cord and the 532209 Direct Connect Cord, both from Philips Respironics.